8. Case 02: The World Map#

8.1. Introduction#

The World Map (The World Map) is a map depicting the entire surface of the earth, usually with topography, latitude and longitude lines, and other data such as place names, etc. Users can use the latitude and longitude lines to find out the specific location of each place on the world map, so as to understand the whole world. There are various ways to project the earth’s surface onto a flat surface. Make a world map puzzle by yourself with TOOCA Laser 1.../_images/tooca-laser-1-case-02-01.png

8.2. Materials used#

TOOCA laser 1

3mm Plywood

8.3. Relevant parameters#

Model TOOCA Laser 1
Material of consumables Basswood board
Thickness 2.8mm
Power 100%
Speed 240mm/min
Times required to be engraved/cut 3

Note: This case takes a 2.8mm basswood board as an example. If you need to use different thicknesses or use different materials, please modify the drawing by yourself and refer to the Recommended parameter modify the parameters of the software.

8.5. Effect show#


8.6. material data#

More detail about the material:laser cutting materialLaser engraving material

Welcome to join the Laser Engraving Cutter Creative Sharing Community to share your creativity.