15. Case 09: The Cutebot Unicorn#

15.1. Introduction#

The unicorn appears in large numbers in June to August, with a tendency to light, mostly day and night, often gathered in the daytime at the sap flow of green oak, or in the light wax trees also often appear to gather hundreds of unicorns, at night, in mountainous areas with street lights, can often find their traces. They mainly feed on the sap of tree wounds, or ripe fruit, and basically do not cause harm to crops and trees.

../_images/tooca-laser-1-case-09-01.png

15.2. Materials Requested#

TOOCA laser 1

Smart Cutebot Kit

3mm Plywood

15.3. Relevant parameters#

Model TOOCA Laser 1
Material of consumables Basswood board
Thickness 2.8mm
Power 100%
Speed 240mm/min
Times required to be engraved/cut 3

Note: This case takes a 2.8mm basswood board as an example. If you need to use different thicknesses or use different materials, please modify the drawing by yourself and refer to the Recommended parameter modify the parameters of the software.

15.5. Effect Show#

../_images/tooca-laser-1-case-09-02.png

../_images/tooca-laser-1-case-09-03.png

../_images/tooca-laser-1-case-09-04.png

15.6. material data#

More detail about the material:laser cutting materialLaser engraving material

Welcome to join the Laser Engraving Cutter Creative Sharing Community to share your creativity.