Safety instructions
3. Safety instructions#
Before operating the Robit Smart Car Kit, please read and familiarize yourself with the following precautions for use. Users should strictly observe all usage precautions and ensure that the Robit Smart Car Kit is properly assembled and in proper working condition. The following operating principles should be followed:
Do not block the movement of the car while the Robit Smart Car Kit is in operation and do not overload the car. Robit Smart Car Kit movement is driven by the motor, the motor blocking or too much load will cause high heat generation and carry out damage.
Do not disassemble or in any other way alter the structure of the Robit Smart Car Kit yourself.
Before each use, be sure to check that the Robit Smart Car Kit’s retaining screws are not loose or have fallen out.
Do not allow the Robit Smart Car Kit to travel in water or spill water on the Robit Smart Car Kit body.
Do not place the Robit Smart Car Kit in a location where it can be easily dropped.
After each use of the Robit Smart Car Kit, disconnect the battery and place it properly.
Do not use sharp objects to scratch or scrape any part of the Robit:bit expansion board.