Hey! Today I’m going to show you how to make a simple “mini 4WD” with our smart Cutebot kit.

In 1982, Japan reduced the size of the radio remote control racing car used for professional sports, removed the steering and remote control devices, and successfully manufactured the first miniature four-wheel drive racing car. The English “MINI” means miniature. Its homophony is “mini”, so people like to call small things “mini”. From the day it was born, the mini racing car has attracted thousands of young people and swept the world with its simulation, novel appearance, strong power, and lightning speed.

First, let’s take a look at the materials we need(as the below picture shows):

Now let’s start to build, first fix the building blocks with screws under the chassis of the Cutebot car(as the below picture shows):

Then we install the remaining parts, and we will get a Cutebot “Mini 4WD”(as the below picture shows):

What we need to do now is to program it, we need go to the micro:bit MakeCode editor and add the cutebot extensions. Code to press button A to make the cutebot move forward at its full speed and press button B to stop it. After downloading this hex. file into the micro:bit and have it connected to the cutebot, here now comes the mini 4WD cutebot.

Here is a video link for this project: https://youtu.be/xiFPUAExhU8

These are all of the introduction to this project, how do you like it? If you have any interesting suggestions or ideas, pls feel free to contact us via [email protected] .