# Joystick:bit V2(EF08231) ## Introduction --- Joystick:bit V2 is a game board based on micro:bit. It contains a 4-direction joystick and 4 undefined buttons. At the same time, it enhances the game experience with its on-board buzzer and vibration motor. Joystick:bit V2 can also be used as a remote control with a good apperance and comfortable feels. ![](./images/joystick_v2_01.png) ***Note:*** There are two versions of Joystick bit V2 ### Joystick bit V2: ![](./images/joystick_v2_02.png) ### Joystick bit V2 Plus: ![](./images/joystick_v2_03.png) ### Products Link [Joystick bit V2](https://shop.elecfreaks.com/products/elecfreaks-micro-bit-joystick-bit-v2-kit?_pos=1&_sid=d4f46b0e5&_ss=r) ## Characteristic: --- - Language: Javascript / Makecode / Microsoft Touch Develop / Python. - Load with buzzer. - Support vibration feedback. - Compatible with the MakeCode packages . - Power off automacticly after unplugging the micro:bit. ## Outlook and dimension --- ![](./images/joystick_v2_15.png) ![](./images/joystick_v2_04.png) ## Main parts introduction --- ### Handle ![](./images/joystick_v2_05.png) X and Y connect to the P1 and P2 port on the micro:bit accordingly. ![](./images/joystick_v2_16.png) The coordinate information of X&Y ### Buzzer ![](./images/joystick_v2_06.png) The buzzer connects to the P0 port on the micro:bit. ### Vibration Motor ![](./images/joystick_v2_07.png) It connects to the P16 port on the micro:bit ### Buttons ![](./images/joystick_v2_08.png) C、D、E&F connect to the P12、P13、P14 and P15 ports on the micro:bit accordingly. ### Installment Install two pieces AAA batteries and insert the micro:bit. Add “joystick:bit” package. Go to MakeCode and create a new project, then click "Extensions". ![](./images/joystick_v2_09.png) Search with “ joystickbit” to add it. ![](./images/joystick_v2_10.png) ## Programming --- Once you press the buttons on the joystick:bit, it comes about vibration feedback with buttons sign showing. ![](./images/joystick_v2_11.png) Link: [https://makecode.microbit.org/_YUaM2rdcFFYx](https://makecode.microbit.org/_YUaM2rdcFFYx) You may also download it directly below:
## Result --- After downloading, turn on the power switch and you will hear the system tone. Push any one button on the Joysitick bit, it vibrates once. ## Project 1: Electronic organ --- ![](./images/joystick_v2_12.png) Link: [https://makecode.microbit.org/_DHgcRfb6oJp5](https://makecode.microbit.org/_DHgcRfb6oJp5) You may also download it directly below: ## Result --- It plays tones through the handle and the buttons. ## Project 2: Direction indicator --- ![](./images/joystick_v2_13.png) Link: [https://makecode.microbit.org/_YVdggwifHWEm](https://makecode.microbit.org/_YVdggwifHWEm) You may also download it directly below: ## Result --- The direction of the arrow on the micro:bit is controlled by the handle. ## Project 3: LED Controller --- ![](./images/joystick_v2_14.png) Link: [https://makecode.microbit.org/_KPMW36Pq0aLm](https://makecode.microbit.org/_KPMW36Pq0aLm) You may also download it directly below: ## Result --- The on/ff status for each LED on the micro:bit is controlled by the handle. ## Below are cases of remote control: --- [Remote control cutebot ](https://www.elecfreaks.com/learn-en/microbitKit/smart_cutebot/cutebot_case13.html) [Remote control TPBot](https://www.elecfreaks.com/learn-en/microbitKit/TPbot_tianpeng/TPBot_tianpeng_case_14.html) ## More Info --- More info pls visit: http://www.elecfreaks.com